CBLSV - ZYVAX 600 - PART B

  • MSDS: CBLSV
  • Manufacturer: XYMET INC
  • Product Name: ZYVAX 600 - PART B
  • National Stock Number: 8010-00N070401
Product Identification

Product ID:ZYVAX 600 - PART B
MSDS Date:08/01/1995
FSC:8010
NIIN:00N070401
Kit Part:Y
MSDS Number: CBLSV

Responsible Party
XYMET INC
7 GREAT MEADOW LN
HANOVER, NJ 07936
US

Emergency Phone: 201-428-5245

Info Phone: 201-428-5245

Preparer: JAY PARTON

Cage: 010V7

Contractor
ZYMET INC
HANOVER, NJ 07936 US

Telephone: 201-428-5245

Cage: 010V7

Ingredients

EPOXY HARDENER; (LIQUID EPOXY HARDENER)

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NOT RELEVANT.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SEVERE IRRITATION TO EYES, SKIN,
AND RESPIRATORY TRACT, INJURIOUS TO MUCOUS MEMBRANES. MAY CAUSE
CHEMICAL BURNS. CHRONIC:MAY CAUSE SENSITIZATION AND DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA OR SKIN CONDITIONS.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. GIVE OXYG IF BRTHG IS DFCLT. GET
IMMED MED ATTN. EYES:IMMED FLUSH W/WATER FOR @ LEAST 15 MINS. CALL
A PHYSICIAN. SKIN:PROMPTLY WASH THORO WITH MILD SOAP AND WATER. GET
MED A TTN. INGEST:IF CONSCIOUS, GIVE PLENTY OF WATER TO DILUTE. DO
NOT INDUCE VOMIT. GET IMMED MED ATTN.

Fire Fighting

Flash Point Method:CC
Flash Point:200F,93C
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.

Accidental Release

Spill Release Procedures:WEAR SUITABLE PROTECTIVE EQUIPMENT. COLLECT
FOR DISPOSAL. TOXIC TO FISH, AVOID DISCHARGE IN NATURAL WATERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH EYES OR SKIN. AVOID
BREATHING VAPOR, MIST, OR SPRAY. USE WITH ADEQUATE VENTILATION.
Other Precautions:STORE IN TIGHTLY CLOSED CONTAINERS.

Exposure Controls

Respiratory Protection:IF NEEDED USE A NIOSH/MSHA APPROVED, ORGANIC
CHEMICAL CARTRIDGE RESPIRATOR TO PREVENT OVEREXPOSURE.
Ventilation:AS REQD TO CONTROL VAPS. LOCAL EXHAUST:WELL VENTILATED
AREA. MECHANICAL (GENERAL):EXHAUST HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:RUBBER APRON. ANSI APPRVD EMERGENCY EYE WASH
& DELUGE SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>392F,>200C
Vapor Density:GTR/AIR
Spec Gravity:1.01 (H*2O=1)
Solubility in Water:MISCIBLE
Appearance and Odor:LIQUID, AMINE ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND ACIDS.
Stability Condition to Avoid:EPOXY RESIN UNDER UNCONTROLLED CONDITIONS.
Hazardous Decomposition Products:CO, CO*2, ALDEHYDES, NITROGEN OXIDES.

Disposal

Waste Disposal Methods:BURY OR INCINERATE IN APPROVED SITE OR FACILITY
IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.